Case Study | HAZWAY 110BAR Pressure Washer: A Lightweight, Efficient, and Safe Solution for Ship Rust Removal

Customer Pain Points: The "Three Mountains" of Ship Rust Removal

In the field of ship maintenance, rust removal and cleaning have long been persistent challenges for shipowners and shipyards. Traditional manual chipping and dry sandblasting methods present three core pain points:

1. Low Efficiency, High Costs: Traditional manual cleaning of a ship often requires 10 workers over two days, whereas a pressure washer can get the job done with just two people in four hours—an efficiency improvement of 5–10 times. Especially during dock repairs, time equals money, and prolonged turnaround times mean skyrocketing berth occupancy fees.

2. Significant Environmental Pressures: Traditional sandblasting generates large amounts of dust and solid waste, causing severe environmental pollution. Today, environmental regulators are imposing increasingly strict limits on particulate emissions from shipyards, making traditional processes difficult to sustain.

3. Base Material Damage and Safety Hazards: Manual scraping can easily damage the steel substrate, and the sparks generated during rust removal pose serious safety risks in the confined and sensitive environment of a vessel.

The Solution: HAZWAY 110BAR Intelligent Pressure Washer

To address these pain points, we recommend the HAZWAY 110V 110BAR Intelligent Pressure Washer. While heavy-duty rust removal often requires ultra-high-pressure units of 500 bar or even 2,000 bar or more, the HAZWAY 110BAR demonstrates irreplaceable advantages in routine maintenance, localized spot rust removal, deck care, and component cleaning—thanks to its lightweight design, cost-effectiveness, and exceptional portability.

Key Specifications & Configuration:

• Motor Power: 2.2KW

• Rated Pressure: 110 BAR

• Flow Rate: 10 L/min

• Voltage: 110V / 60Hz

• Accessories Included: Pressure washer gun, 4 quick-connect nozzles, high-pressure hose, detergent hose with filter, tool kit, and user manual.

Product Advantages: Why It Excels in Marine Light-Duty Rust Removal

1. Plug-and-Play Convenience

Onboard power supplies are typically 110V/60Hz. The HAZWAY washer is perfectly compatible with standard marine voltage, requiring no additional transformer—just plug in and start working. Its compact footprint  makes it easy to store and maneuver in tight engine rooms or on crowded decks.

2. Physical Rust Removal – Eco-Friendly and Safe

The unit uses high-pressure water jets to physically strip rust and salt deposits. Compared to chemical cleaners or sandblasting, this pure physical process leaves no chemical residues and generates no sparks—a critical safety feature for marine applications. The water jet effectively removes salt crystals and surface rust caused by long-term seawater exposure, preventing secondary corrosion.

3. Precision Cleaning Without Substrate Damage

Unlike ultra-high-pressure units (3,000 bar and above), which can risk damaging the steel plate, the 110 BAR pressure causes virtually zero harm to the base material when removing surface rust and old coatings. With the included 4 quick-connect nozzles of varying spray angles, users can easily adjust the water pattern to match the severity of the rust, enabling precise cleaning of stubborn spots.

4. All-in-One Accessories – Ready to Use Out of the Box

The package includes not only the main unit but also the gun, hose, filter, and nozzles—everything needed for immediate assembly and operation. This all-in-one approach is particularly valuable for time-sensitive ship repair tasks.

Customer Feedback & Conclusion

"On a ship, not every rust removal job requires a giant industrial machine. This compact HAZWAY unit is really practical—just plug it in and it handles scattered rust spots on the deck and salt deposits on equipment surfaces. Work that used to take several people can now be done easily by one person, and we don't have to worry about damaging the paint on the hull."
— Chief Engineer, a Shipyard

For shipowners seeking a low-cost, high-efficiency, non-damaging cleaning solution for vessel maintenance, the HAZWAY 110BAR Pressure Washer is a smart choice for spot rust removal and routine upkeep.

Contact us for a quote and give your vessel the professional protection it deserves.

案例分享 | HAZWAY 110BAR高压清洗机:为船舶除锈提供高效,安全的轻量化解决方案

客户痛点:船舶除锈的“三座大山”

在船舶维护领域,除锈和清洁一直是船东和船厂面临的老大难问题.传统人工敲铲和干喷砂工艺存在三大核心痛点:

1. 效率低下,成本高企:传统人工清洗一艘船,往往需要10名工人耗时两天,而高压清洗机只需两人4小时即可完成,效率相差5-10倍.尤其在坞修期间,时间就是金钱,漫长的工期意味着高昂的船坞占用费.

2. 环保压力巨大:传统喷砂除锈会产生大量粉尘和固废,严重污染环境.如今,环保部门对修造船厂的颗粒物排放监管日益严格,传统工艺已难以达标.

3. 损伤基体与安全隐患:人工铲刮易损伤钢板,且除锈过程中产生的火花在船上这种特殊环境中存在严重的安全隐患.

解决方案:HAZWAY 110BAR高压清洗机登场

针对上述痛点,我们向客户推荐了这款HAZWAY 110V 110BAR智能高压清洗机.虽然市面上用于重度除锈的往往是500bar甚至2000bar以上的超高压设备,但HAZWAY 110BAR凭借其轻量化,高性价比和极致便携的特性,在船舶的日常维护,局部小范围除锈,甲板保养及配件清洗场景中,展现出了不可替代的优势.

产品核心参数与配置:

• 电机功率:2.2KW

• 额定压力:110BAR

• 流量:10L/min

• 电压:110V/60Hz

• 配件清单:包含高压水枪,4个快速连接喷嘴,高压软管,洗涤剂软管及过滤网,工具包等.

产品优点分析:为何适合船上轻量级除锈

1. 即插即用,灵活便捷

船上电压多为110V/60Hz.HAZWAY清洗机完美适配船舶标准电压,无需额外变压器,实现“即插即用”.其紧凑的机身设计,便于在狭窄的机舱或甲板角落收纳和移动.

2. 物理除锈,环保安全

该设备利用高压水射流的冲击力剥离锈层和盐分.与化学清洗剂或喷砂相比,纯物理清洗无化学残留,无火花产生,这对船舶安全至关重要.水射流能有效清除海水长期侵蚀形成的盐晶和浮锈,防止二次腐蚀.

3. 精准打击,不伤母材

相比超高压设备(3000bar)可能带来的钢板损伤风险,110BAR的压力在清除浮锈和旧涂层时,对基体的损伤几乎为零.配合附赠的4个不同角度的快换喷嘴,用户可根据锈蚀程度灵活调整水型,实现对顽固锈点的精准清洗.

4. 一站式配件,到手即用

包装内不仅包含了主机,还配齐了高压枪,管,过滤器及喷嘴.用户无需额外采购辅件,开箱即可进行组装作业,这对于时间紧迫的船舶维修作业来说极为便利.

客户反馈与结语

“在船上,很多除锈工作并不需要那种巨大的工业机.HAZWAY这台小机器很实用,接上电就能处理甲板上的零散锈点和设备表面的盐渍.以前要几个人干的活,现在一个人拿着它就能轻松搞定,而且不用担心伤到船体表面的油漆.”——某船厂轮机长.

对于寻求低成本,高效率,零损伤船舶清洁方案的船东而言,HAZWAY 110BAR高压清洗机无疑是局部除锈与日常维保的明智之选.

联系我们获取报价,为您的船舶提供专业防护.